• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Centering Front Axle

NYBronco

Full Member
Joined
Oct 4, 2004
Messages
246
Loc.
Hartford, CT
What is the best way to measure and center your front axle. I was working on mine with soem help from a couple others from here and we seemed to get it within an 1/8th of an inch. When I went to install my Stone Crusher steering the rod was too long. Anthony thinks I might be off center still.

Any help is appreciated.

Thanks-
 

ken75ranger

Bronco Guru
Joined
Jan 27, 2002
Messages
5,069
Loc.
Troy, NY
BTT. I haven't found anything yet. Collins is the last name right??? My wife does know your family.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
when you adjust the tracbar,i the idea is NOT to center the axle,but to get the front and rear axle parrallel with each other so your rig wants to go straight. theoretically it should be centered at that point, but what you really want is the the axles parrallel so your rig is not wanting to make a big circle. you can thank ford for this, if the radius arms were parrallel with frame rails this wouldnt be an issue but.............
i measure from front axle by the knuckle to the rear axle,then do the other side. make those distances the same by lengthening the tracbar or shortening it. hopefully when you get done you axle is centered,if its not, radius arm length or mounts are not even, and i wouldnt do anything about it unless its major.
 
Top