Just bought a second Bronco ('73) on Tuesday $12000, nice frame-off someone did a few years back. New 302, C4, new paint, 3.5" duff ultimate lift, etc., everything rebuilt in 2001. The kid I bought if from (he bought it from the guy who did the resto for $16,000) had no business owing it, no maintenance, no up-keep. It's stranded at a friends house (went to show it off) 20 miles away. The idle is way too high and when I put it into reverse on an inclined driveway it clanked really hard, something broke. It clicks and starts like a rubbing clanking thing all the way up to vibration at about 20mph. I removed the front drive shaft, still did it, re-installed the front and removed the rear, locked the front hubs, still did it. Is it the transfer case? Low on fluid? The ATF level is good and I have 1st, 2nd and 3rd. When I got the rear shaft out, the rear u-joint caps fell off and the roller bearings were shavings and rust dust.It has a Duff trans case shift lever with no button. Any ideas? I need to get it home and go over it front to back for a month before I drive it again.











