• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

crazy idea?

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
since i no longer use my H block, i still have the imbalance indicator light on the dash. i'm thinking about wiring it to my brake lights so i know they're working when i hit the brakes (everybody knows how a worn brake light switch won't let your lights come on sometimes). on my new dash the lens is in perfect condition, and i have a LED bulb from BC so it won't burn out or melt the lens from heat.

is this a dumb idea?
 
OP
OP
73stallion

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
don't drive it hardly at night, and there's plenty of other things to keep my attention on while wheeling. thought of that.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
If you move the turn signal indicator lights to the rear wires in the column connector they'll work when the brakes are on and they'll tell you when your turn switch is broke.
 
OP
OP
73stallion

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
that'd work too, but i don't want the turn indicators lighting up. i just like to be different anyway.
 

needabronco

Bronco Guru
Joined
Jul 2, 2004
Messages
6,411
Loc.
Prescott/Farmington
If your worried that the switch won't work, then why not just use some common sense and replace the switch as preventative maintenance? Seems like a lot of work otherwise......


BTW, mine has an led that's wired as my check engine light for efi, which is something that's actually useful.

Just sayin...
 
OP
OP
73stallion

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
well i did it, not really annoying since it's not in line of sight. my brake light switch is a few years old, had to replace it after i installed hydro because the switch was worn, which is why i wanted to do this.
 

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
I put a brake light switch on the parking brake and wired it to that light. There have been plenty of times when I start to take off and see that light staring at me and it reminds me to undo the parking brake.
 
Top