Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Thats me, thanks, I would be willing to make them if people wanted- I would rather make a few sets to make it cost effective, they really work well in the rocks protecting the body
I have done this on both of my trail trucks i cut 1/4" form top of rocker welded 1/4" x4" plate to rocker and both post and drilled holes in roker lege and plug welded it . I then welded 5"x2" tubing and 2"x2" kickers back to frame I made plates and welded to frame first and then welded 2X2" to that its very strong but the body is fixed to frame now.I have also tied my rollbar to this to.I have 4 2x2x1/4" going to frame this is alittle overkill but its payed for its self already.
Thats me, thanks, I would be willing to make them if people wanted- I would rather make a few sets to make it cost effective, they really work well in the rocks protecting the body
Thats me, thanks, I would be willing to make them if people wanted- I would rather make a few sets to make it cost effective, they really work well in the rocks protecting the body