• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dakota Digital HDX Install

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
I ran a DD cluster early on, pretty much when they first came out for our Broncos. The only issue I had with it was that the odometer wouldn't
record any mileage when crawling off-road. Not enough PPM's when moving slowly I guess. You guys see this problem with the newer versions?
 

tripleJs15

Full Member
Joined
Jun 20, 2020
Messages
166
Did you ever figure this out, I'm wondering the same right now - thanks in advance!
I have a VHX gauge with an AAW harness. Dakota recommends tying into the taillight circuit for tge DIM connection. Can I use one of the dash light connections instead?
you e
 

Lt1Burb

Jr. Member
Joined
Oct 25, 2020
Messages
139
For you guys that installed a Dakota Digital cluster, where and how did you choose to mount the control box? I'm installing mine this week and need some ideas.

Thanks!
I built a bracket and mounted it to the brake bracket.
 

Attachments

  • E9BD2206-0C7B-4773-9FAC-87CE869DD579.jpeg
    E9BD2206-0C7B-4773-9FAC-87CE869DD579.jpeg
    108 KB · Views: 72

Lt1Burb

Jr. Member
Joined
Oct 25, 2020
Messages
139
I have a VHX gauge with an AAW harness. Dakota recommends tying into the taillight circuit for tge DIM connection. Can I use one of the dash light connections instead?
Yes you can just use a dash light bulb hot, same as taillight wire.
 
Top