• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dash nut in Windshield frame

Dlish

Sr. Member
Joined
Dec 6, 2011
Messages
552
Scored a good shape windshield frame, except for one of the captive nuts in the frame that the dash bolts go to. The bold was cut off, and no amount of heat, chemicals, and mechanical force could get it out.

Think I may be down to cutting open the frame, and replacing the threaded piece.

Anyone have some pointers to pics to show what it looks like in there?
 

onpier55

Sr. Member
Joined
Oct 19, 2017
Messages
354
Loc.
Roseville Ca
Nut fell in on mine. I cut it and made a new nuts from flat stock.
 

Attachments

  • 0FC7E163-4BFC-455B-AD70-2B51F82715DD.jpg
    0FC7E163-4BFC-455B-AD70-2B51F82715DD.jpg
    112.3 KB · Views: 146

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,761
my offering. not a bad job all things considered

Hank

IMG_3729.JPG

IMG_3731.JPG

IMG_3730.JPG

IMG_3732.JPG

IMG_3733.JPG
 
OP
OP
D

Dlish

Sr. Member
Joined
Dec 6, 2011
Messages
552
Perfect, much appreciated fellas.

Supposed to rain this evening, excellent night to sit in the garage to cut and weld.
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,708
Loc.
NH
THAT hank feller is pretty smart....not pretty but pretty smart ;D
 

Attachments

  • hank.jpg
    hank.jpg
    110.4 KB · Views: 122
OP
OP
D

Dlish

Sr. Member
Joined
Dec 6, 2011
Messages
552
Was going to make a new threaded piece, but all the smart people who know how to use machines to make holes left early. I hate walking out there and seeing blank screens. damnit

Back to the T handle
 

Attachments

  • IMG_0819.jpg
    IMG_0819.jpg
    141.2 KB · Views: 95
  • IMG_0818.jpg
    IMG_0818.jpg
    113.3 KB · Views: 115
OP
OP
D

Dlish

Sr. Member
Joined
Dec 6, 2011
Messages
552
Just add an update and more pictures for the next person who needs this info.
Appreciate the comments above, pretty simple job. I cut small at first and had to enlarge the hole a couple times to get the threaded piece out.

(I am not a great welder. but I can get enough boogers on to make it hold and spend a lot of time grinding)
 

Attachments

  • IMG_0822.jpg
    IMG_0822.jpg
    92 KB · Views: 64
  • IMG_0824.jpg
    IMG_0824.jpg
    77.9 KB · Views: 63
  • IMG_0826.jpg
    IMG_0826.jpg
    72.8 KB · Views: 67
  • IMG_0830.jpg
    IMG_0830.jpg
    75.9 KB · Views: 86
  • IMG_0831.jpg
    IMG_0831.jpg
    85.3 KB · Views: 71
Top