Daves 71 NH Build

[dave67fd]

Well I guess I'm way overdue on getting some progress posted but trying to get myself motivated to try and start hitting this a bit harder.

Hitting the smaller stuff for now and awaiting some more sheet metal parts.
This is the passenger rear inner fender repair.

 

[hankjr]

Perfect Dave. Just keep banging away like that!

Hank

 

[dave67fd]

This is the rear filler neck repair. Old is cut out and new is fitted awaiting reweld and driver outer rocker is out.

 

[fatboy]

Looking good Dave! I have a plasma cutter if you want to borrow it to cut patch panels out of the flat stock you have.

 

[tasker]

Gotta see it at next years event!! Keep after it Dave!!

 

[migs]

nice job Dave! keep picking away, it'll be done before you know it.

 

[dave67fd]

Thanks all...Hoping not to cut too many more custom pieces but will let ya know Pete thanks.

 

[Master Chief]

Eww! That rocker...I think I just puked a little bit. Probably happy to cut that crap out. Keep that up and you'll have a shiny new Bronco in no time.

 

[broncoitis]

Great job Dave! Keep pluggin away it gettin there! ;D

 

[dave67fd]

A Belated thanks guys.

Did a repair on the passenger rear wheel well to extension panel.
Have a high weld area I still want to hit a litle bit more but came out acceptable.

Also put together a couple of cowl supports. Nice to repurpose the crappy Aero tank brackets.;D

 

[Slednut10]

I'm seeing far more patience and talent than you give yourself credit for. Good to see ya back at it!

 

[fatboy]

Looking good D!

 

[Pa PITT]

DAVE What are you spraying on your finished repairs.
NO I DID NOT READ every page to see what your using.
But it looks good over your repairs..
Nice work..

 

[tasker]

NICE job Dave!! looking real good!!

 

[sprdv1]

I'm seeing far more patience and talent than you give yourself credit for. Good to see ya back at it!

Ditto here.. making good progress

 

[dave67fd]

DAVE What are you spraying on your finished repairs.
NO I DID NOT READ every page to see what your using.
But it looks good over your repairs..
Nice work..

Thanks Pa,
I'm using Eastwood's Self etching weld thru primer.
http://www.eastwood.com/eastwood-self-etch-primer-gray.html

I'm seeing far more patience and talent than you give yourself credit for. Good to see ya back at it!

Looking good D!

NICE job Dave!! looking real good!!

Ditto here.. making good progress

Thanks for the all the nice comments guys..Much appreciated.

 

[Vin218]

Looking good Dave, nice work!

 

[Pa PITT]

...i thought that looked like that weld thru primer. I sold 3M BRAND.
IT was good stuff.

 

[dave67fd]

Little more progress.
Blasted the E-brake assy and accelerator pedal over the winter and just got to priming/painting recently.
Pulled the passenger outer and inner rockers.
Too deep in to turn back now.%);D

 

[dave67fd]

Anybody know where to purchase this piece? Haven't seen them around.
I can repurpose if needed just figured be cheaper to just buy one if available.
I believe it's the passenger seat or lap belt support bolt/bracket.