• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Definitive Answer On An Often-Asked Question

Texas9902

Jr. Member
Joined
Jun 14, 2013
Messages
176
Loc.
Dallas (Lakewood)
I know that this issue has been discussed ad-nauseum here and I have searched and read all the threads I could find, but I could not find a definitive answer to the question of whether 33x10.5x15 BFG AT KOs will fit an uncut EB with a 2.5 inch lift and stock rims without any rubbing or without having to roll under the rear fender lip. I know that leucbronc is running a similar setup with different tires and posted on it. He said that he gets some rubbing, but I did not know if that may be different with BFG AT KOs. I see that Nick will put those tires on his rigs with a 2.5 inch lift and they look great, but am not sure of what magic he may be using to make that happen, if any at all.

Any feedback from anyone with experience with these tires with this lift would be greatly appreciated.

Thanks
 
Joined
Feb 4, 2011
Messages
44
Loc.
Cheyenne, wy.
I was running 31x11.50-15 b.f.g.'s on an uncut 74 with a 2.5 lift and they rubbed at every bump. Went to a 31x10.50 and the rubbing stopped. Pretty sure the bigger tires will rub.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,341
Usually with 33x10.50's the only rubbing you'll get is on the inner fender lip at full flex which can be bent to clear.
Of course other things like body mounts should be in good condition. If they are worn out you may get more rubbing.
 
Top