• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Do all years 9P ECM have the same programming?

bronco loco

It never ends
Joined
Nov 12, 2005
Messages
2,735
Loc.
Long Island New York
I began to gather parts for the Explorer 5.0 swap, are all 9P ecm programmed the same?, does it matter what year I get it from? Please let me know.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
A9P? I would think they are all the same. Ford was good at putting different ID codes on ECMs with different programming.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,110
If the computer has the same box code on it, it is programed the same.

Not to say there isn't differences between them. Friend has a bunch of them and he opens them up and points out different years have different processors, drivers, etc. The generic computer with programming to set the box code. I have heard that some years will have the driver for an electric fan and other won't (stuff like that). Just because the driver is there doesn't mean the feature will function, software programming would be needed to turn on and tune that feature.

But you should be able to swap out any computer between any car that has the same box code and it will run exactly the same as the programming is the same.
There is a reason for this. cost of testing. New code, new batch of testing, more money spent. So same code, carryover emissions testing, money saved. Also few part numbers stocked in dealers back rooms and Ford warehouses.
 
Top