• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dodge 17" Wheels Question

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Anyone know what the backspacing is on these Dodge wheels? They're steel, 17x8, and 5x5.5. The center bore would need to be opened up for the front. They were used on mid-2000s 1500s. I can't find any reliable backspacing info on them.

from a craigslist ad

01212_fQOWCpXjMtv_600x450.jpg
Those have a lot of backspace. Something like 5". I have them on my uncut with 34s. Also 3 1/2" lift plus 1" body.
 
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I made a plate that bolted to wheel with a pilot hole in the center.

Do THESE work on stock height, un-lifted truck?

Also it looks like the 17" are 30.5" tall and my stock 29". That is going to reduce my rpm at 60 mph. That may crap this plan because my 4R70W and stock 3.5:1 rear has me loafing along at 1,400 rpm at 60 mph. A taller tire will make this lower..
 
Last edited:
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Back to the top..

Do the 2004-2012 Dodge steel wheels with stock tires fit a non-lifted, non-flared truck?

Everyone says they are cool, handle great, need to open the hole up, work with knuckles etc.
 

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
Yes they will fit an unlifted truck. The wheels have a lot of back spacing to tuck the tire inside the rear uncut wheel well. Tire size is the next question. You can't go very wide.

Personally i would go with a WH 2 1/2" Lift and a 265/70/17 tire mounted on the 17x7" Dodge Wheel as pictured in post #10.
 
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
Super thanks for the confirmation. Considering tire sizes I have two additional questions.

Stock/what I have now that I know fits:
235/75-15: 29" high, 9.3" wide (internet calc), 14" of sidewall (29-15=14" sidewall)

I want the truck to handle better so I am trying to reduce the sidewall - whole point of 17" wheels for me. Others maybe do this to get a lift. I have stock gear 3.5:1 and a 4R70W so I am pulling 1400 rpm at 60. I do not need to reduce that!

235/75-17: 31" tall, 9.3" width, 14" of sidewall - all the same except taller so it wil reduce my rpm at 60 mph but have the same handling.

235/70-17: 30" high, 9.3" wide, 13" of sidewall - shorter tire but also shorter sidewall for better handling

235/65-17: 29" high (same as current), 9.3" wide (same as current) but with a 12" sidewall

If this data is correct then I can go to 17" wheels and reduce the sidewall from 14" to 12" and keep it physically the same dimensions. BUT with the back spacing I guess I could go up a few tire sizes to maybe 245 or 265???

255/60-17 is the same height and width as 235/65-17 but goes from 9.3" to 10". If it fits that would be nice.

Check out this cool calculator it also includes revs / mile. https://tiresize.com/height-calculator/

This is making my brain hurt.
 
Last edited:

rguest3

Bronco Guru
Joined
Dec 13, 2012
Messages
3,780
Your Bronco would "Handle" a lot better if you got rid of that Stock Suspension.
 
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I wanted to bump this I could really use some pics or experience with 17" wheels on a stock height / stock gearing truck with the lower profile tires?

Anyone have any pics?
 
Last edited:
OP
OP
pcf_mark

pcf_mark

Bronco Guru
Joined
Jun 11, 2010
Messages
3,697
I scored a set of Dodge 17" wheels for $60 with caps and lugs! Bumping this back up because I am hoping someone has experience with a lower profile tire to help handling.

Stock/what I have now that I know fits:
235/75-15: 29" high, 9.3" wide (internet calc), 14" of sidewall (29-15=14" sidewall)

I want the truck to handle better so I am trying to reduce the sidewall - whole point of 17" wheels for me. I have stock gear 3.5:1 and a 4R70W so I am pulling 1400 rpm at 60. I do not need to reduce that with a taller tire.

235/75-17: 31" tall, 9.3" width, 14" of sidewall - all the same except taller so it will reduce my rpm at 60 mph but have the same handling.

235/70-17: 30" high, 9.3" wide, 13" of sidewall - shorter tire but also shorter sidewall for better handling

235/65-17: 29" high (same as current), 9.3" wide (same as current) but with a 12" sidewall

If this data is correct then I can go to 17" wheels and reduce the sidewall from 14" to 12" and keep it physically the same dimensions. BUT with the back spacing I guess I could go up a few tire sizes to maybe 245 or 265???

255/60-17 is the same height and width as 235/65-17 but goes from 9.3" to 10". If it fits that would be nice.

Check out this cool calculator it also includes revs / mile. https://tiresize.com/height-calculator/

This is making my brain hurt.[/QUOTE]

Thanks fellas!
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
You are testing the waters, let us know how it works. I'd go with whatever fits rim and what the tire guy says, they are pretty smart. I'd stick with 31 tall though for ride and driveability.

I was going to this but decided against drilling out front rim. Meaning drilling spare out plus, etc etc. I am planning to wheel it and felt I didn't want to lose that extra metal as it is a thin steel rim compared to older school 5 spoke white rims which are about 1/4 inch thick..
 
Top