• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Duff Heavy Duty vs other lifts

Johnnyb

Contributor
Bronco Guru
Joined
Nov 19, 2001
Messages
1,233
Loc.
Flagstaff
On an outing this weekend it was pointed out that my drivers rear is slightly saggy, like 1" below passenger rear. This is an older WH 2.5" lift (like 1996 vintage), so it might just be time for an update. Plus with the 35's, I probably should go 3.5.

I was looking at 3.5" lifts from WH and Duff and I noticed that Duff has a "heavy duty" option. My build came out heavy, with ProtoFab rear bumper with spare tire and ice chest/jerry can holder which I use constantly. Plus there's usually a couple hundred pounds of camping gear in there and a 23-gallon tank.

Is there any real advantage/disadvantage to the Duff heavy duty lift or real world experience with it? Any other recommendations?

THX,
-John
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Back to the top for you, Johnny. I don’t really have any idea since I’m not familiar with that particular part.
But to my mind, it doesn’t depend on naming, as much as it depends on what the actual specifications are. And actual spring rates are usually hard to come by.
 
Top