• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

early 1966 bronco brake light switch

harleyabarton

Jr. Member
Joined
Mar 23, 2019
Messages
64
Loc.
Jupiter
alright guys i feel like im stupid for how many things have caused me problems with this bronco. but here it is. im installing bronco graveyards power brake conversion. ive used toms bronco parts one before so im good as far as installing that. but my problem is. idk what to do with the break light switch. because originally it would turn the brake lights on when the switch inside the master cylinder felt pressure and would turn the lights on. there is NO switch down by the peddle so im really confused on what i can do the solve this. this is the early 1966 there is not even a back up light inside the tail light housing or lens or a back up light switch connected to the shifter. so this is pretty weird.
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Get the pedal mounted switch and route the two wires that attached to the pressure switch to the pedal mounted one.
 

rmk57

Sr. Member
Joined
Feb 24, 2016
Messages
580
Either the way Justino suggests or use a brass tee to mount your original pressure switch and wires.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I used a 78 switch and made an L bracket to hold it near the later EB location. I had issues getting the later year EB switch to work consistantly and was told about the 78 swap.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
There ya go Harley. Four answers, four slightly different ways of doing it.
Simple, right?

But as those all suggest, it's all custom and up to you which way you think is simpler.
Nothing wrong with any of them. My personal go-to is always the typical linear actuating switch on it's own little L-bracket mounted up by the pedal. In fact, I think some GM based switches even come with their own bracket. Sorry I don't know part numbers, but pretty sure I saw one.

If you make your own bracket, you can also choose between switches that activate when pushed, or activate when extended. Gives you some leeway if you find a good mounting point you like.
And the cool thing is that they're adjustable so are easy to set up.

But I've also got so many tube fittings laying around in piles and cans and drawers that I could probably find a T junction to thread the old switch right into and be done. All without a single trip to the parts store!
Since you're already plumbing new lines anyway, this might be your most direct and simple approach.

Then again... Every Bronco is Different!

Good luck. Shouldn't be too big of a dilemma though. Maybe someone will post up pics of what they've done. I don't think I've ever taken pics of the ones I've done.

Paul
 

B RON CO

Contributor
Bronco Guru
Joined
Jun 29, 2016
Messages
2,484
Loc.
Statesville, NC
Hi, do you mean you already have a dual piston master, with the proportioning valve, or was that from another project?
Anyway I'm thinking the single bowl master cylinder is going, and a new dual bowl master cylinder, booster, and two new lines going to a new proportioning valve are going in.
So it is simple enough to just tee in the old brake light switch on one of the lines to the proportioning valve.
That is what I did.
Good luck
 
Top