- Joined
- Oct 3, 2013
- Messages
- 104
Tired of dealing with the unpredictability of my old worn out Holley 600cfm Carb, I decided to give it a rebuild. Everything was dialed in, timing adjusted, floats were set, etc. It ran great for the next few weeks, then out of the blue began to act up again. It would nearly die when I came to a stop, it was running very rich, leaned it out as much as possible, still rich. Every now and then, it would run great, then more issues. My 73 Bronco is my daily driver, so fed up with the carb I began looking into a Throttle Body Setup. Johnny here at our shop is running the MSD Atomic EFI and has been very happy with it, however we (Wild Horses) are also an Edelbrock Distributor. I had heard great things about the Edelbrock E Street EFI on Street Rods, but had never heard of anyone in the Offroad World, or our Bronco Community running this setup, so I decided to take one for the team.;D I picked up the Edelbrock E Street Basic kit, which includes the Throttle Body, ECU, Harness, O2 Sensor, and a 7" Android Tablet. The tablet can be used to view your Air Fuel Ratio's, RPM's, Air and Coolant Temp, Amps, Fuel Pressure, tuning, programming, video, music, pictures, navigation, browsing the internet, etc. I was hoping for a straight forward install, better performance on and offroad, better fuel economy, throttle response, and of course reliability. I can honestly say that after installing and running this setup for a few months now, I am very pleased with the results. Here are some pics and the install