• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Efi / 4r70w

Snackslinger

New Member
Joined
Jul 16, 2020
Messages
44
I want to run efi. I already have a 4r70w and want the efi to also control the transmission. I think the Holley terminator x will. Any suggestions?
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
Go stock explorer stuff. Figure out what year your trans is and then find an explorer and get the compute and harness. Also get the injection stuff too. and the front dress. All good stuff
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
How mild or wild will the engine be?
If it is a mild or even stock engine, Explorer EFI will be fine.
If going aftermarket EFI the typical solution is a stand alone transmission controller as well. No experience with transmission controllers built into aftermarket EFI.
 

duffymahoney

Contributor
Bronco Guru
Joined
Apr 26, 2015
Messages
2,734
Go stock explorer stuff. Figure out what year your trans is and then find an explorer and get the compute and harness. Also get the injection stuff too. and the front dress. All good stuff

I think EFI guy is no longer doing the explorer ecu stuff.
 

duffymahoney

Contributor
Bronco Guru
Joined
Apr 26, 2015
Messages
2,734
I saw a post about it? Something to do with the new race car laws? I could be wrong.
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
I saw a post about it? Something to do with the new race car laws? I could be wrong.

Yeah I can see that with the EPA pushing their agenda about normal people can't take a legal street vehicle and convert it to a track car.

Look up the RPM act that SEMA is trying to push through Congress, it has support, but needs all of us to chime in...

https://www.sema.org/epa-news
 

tripleJs15

Full Member
Joined
Jun 20, 2020
Messages
166
Very helpful thread, still unclear on a few items for a 4r70 swap:
a. What year/model donor works best
b. Do I use all stock donor stuff (TCM, Harness etc)
c. Other than the adapter what else is needed with a Holley Sniper setup?
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
So after speaking with Garry, EFI Guy, this weekend I can say that the EPA's current position is giving him pause, and he has changed the way he does business somewhat. He is also 4-6 months out with harness work. So factor that into your builds... Much demand for his services.

98 and later 4R70W's had most of the up grades done
96-97 are still good, but there are upgrades that can be done, for a used tranny you will probably need to go through it anyway.

There is a 2wh drive and 4 wh drive versions, each one takes a different AA adapter.

Generally speaking, you want to make the year of the harness to match the year of the tranny.

I can't offer any insight about the Sniper controlling the 4R70W. Based on my one time Sniper conversion on a 79 Trans-am, I would not do it again. Others have great stories to tell, I had a bad unit right out of the box. :(
 
Top