• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

EFI engine temperature

broncaholic

Full Member
Joined
Aug 17, 2009
Messages
280
Piggybacking on my EFI Gurus troubleshooting, if my motor has a 170 deg thermostat in it, can I expect my engine to run ok?

Tx
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
EFI systems run much more efficient at higher temps. i'd run at least a 180, but a 195 would be better.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
The ECU looks for a certain engine temp to help decide what mixture and timing curves to use. Get a thermostat that matches what would have been in the car the ECU came with.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Piggybacking on my EFI Gurus troubleshooting, if my motor has a 170 deg thermostat in it, can I expect my engine to run ok?

Tx

That cold it will probably hang in open loop, cold enrichment. Reduced fuel economy.

Put in the proper thermostat and it will be happier.
 
OP
OP
B

broncaholic

Full Member
Joined
Aug 17, 2009
Messages
280
Looked through my Ford Mustang tech manual and found that the motor came stock with a 195 deg and for every 10 degrees below that, the EEC enriches the mix by 2% thinking the engine is cold and trying to warm it up.

Thanks for the responses
 
Top