• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

EFI fuel rails

Rollin

Full Member
Joined
Jul 2, 2007
Messages
268
Loc.
Port Angeles, WA
Sorry for such a dumb question, but when I removed the 5.0L I didn't pay any attention to fuel lines and now I need to hook up the lines. Is the return line the one that goes to regulator and pressure side looks like a fuel pressure gauge would hook up to.
My manual doesn't really say anything about which is which. There must be a simple way to tell.
Mark
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Pressure is the one that goes to all the injectors and the pressure test port.
Return is the one to the regulator.

The regulator is a blow off valve. When the pressure in the rail get high enough, it vents excess flow to maintain the desired pressure.
 
OP
OP
Rollin

Rollin

Full Member
Joined
Jul 2, 2007
Messages
268
Loc.
Port Angeles, WA
Thank you so much, What would happen if it got hooked up backwards? just wondering, and no I haven't fired it up yet but just thought I would ask.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Backwards, no fuel pressure at the injectors and the engine would not start. I am amazed at how many people I have seen swap fuel injection and make that mistake.
 
Top