Like several have mentioned on this post already- the angle is not a "must have" measurement.
Much of the "correct angle" has everything to do with the proposed use of the rig. This looks like a street/mall crawler (as we call them) Bronco so driveline issues usually aren't an issue (unless you're going with a lot of (edit) lift- like 4-5").
Stock or up to 3 1/2" suspension lift & you are good to go with more than the "common-not hard fast rule" of appr 5deg or so. When you have too much angle on the ujoints when flexing or the frt axle is at full droop- that's when you could have a problem.
Slap a 15 dollar angle finder on it for curiosity & keep putting it together as it looks very nice.
Driving it at 6 or 7deg won't hurt a thing. Looking at the tcase and valve cover to firewall clearance in your pics & you look fine.
What does a WH HD mtr mount look like-like a stock mtr mount or the ones that are sold with rd poly bushings in them?
Much of the "correct angle" has everything to do with the proposed use of the rig. This looks like a street/mall crawler (as we call them) Bronco so driveline issues usually aren't an issue (unless you're going with a lot of (edit) lift- like 4-5").
Stock or up to 3 1/2" suspension lift & you are good to go with more than the "common-not hard fast rule" of appr 5deg or so. When you have too much angle on the ujoints when flexing or the frt axle is at full droop- that's when you could have a problem.
Slap a 15 dollar angle finder on it for curiosity & keep putting it together as it looks very nice.
Driving it at 6 or 7deg won't hurt a thing. Looking at the tcase and valve cover to firewall clearance in your pics & you look fine.
What does a WH HD mtr mount look like-like a stock mtr mount or the ones that are sold with rd poly bushings in them?
Last edited:











