• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

explorer starter relay

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
I have a 4r70w from explorer and the 5.0 with rjm harness. is there a reason to not just use the relay that is on the starter. i put all my fuses and relays in glovebox so i made all connections under dash to rjm and optishift. if i can use the relay will a positive from battery and the red/blue from the old relay be all i need to make it work? thanks
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
The factory Bronco ignition switch gets finiky about sometimes giving power in the run position while cranking, and at times not giving power. When it decides to not give power it shuts down the ignition (and EFI) during crank making for a no-start. The relay uses the "I" terminal to make sure power is kept alive in the run circuit during crank.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
And quite a few Bronco owners who have done the swap and used the wiring method you describe report the starter running-on for a few seconds after each start.
It's not everyone that has the problem, but I'd say that at least half the people that report doing it that way also report having the run-on issue.

Still, worth a try as far as the run-on is concerned. The finicky starting could be another thing altogether.
Probably a semi-easy workaround, but I'm not sure what that might be.

Paul
 
OP
OP
T

trentturner27

Jr. Member
Joined
Sep 25, 2011
Messages
82
that makes sense.... I was trying to keep as much stuff out of the engine bay as possible if I didn't need it. In an attempt to do this I made all the rjm connections under dash. orange on rjm to keyed run which is red/green. the optishift is also needing keyed run in the red wire with a fuse and aslo the 12v in run white wire, which I think is power for backup lights. is that too much to hook up to that one reg/green from bronco?
 
Top