Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I saw a '66 on Craig's List where the guy used the back section of a '66 ford pickup cab to enclose the Bronco cab, and then I believe the rear bed area of the Bronco right up to the rear of the door jambs finished of with the front bed section from the '66 truck. It was pretty sweet. I want to say it was either Las Vegas or L.A. I'll look for it to see if I can find a link for pictures.
Check out Tito's, he got a sweet 12" stretch (can't find my pic of it), kb6677 has a bad axx with a 12" longer, custom frame/ with a stretched body (the white one).
I stretched my frame and body 10", gave me a 102" wheelbase (the Silver one)
Good luck!!!
I know of one being built in AZ. I have seen pictures, but don't have any.
Stretched wheelbase, cab and bed split (not a unibody style). Half cab for the front. Not a 4-door. narrowed and cut up full size truck bed. Still had a lot of work to be done to it.
Crewwzin's Hottie of a womanfriend! Crewwzin is working on it, He already took care of the clutch/brake bracket that was welded to the firewall, Yea WTF was with that?
They start looking a little odd if the get to long IMHO because the Bronco's are kind of narrow. Planning on a 12" stretch on my upcoming Bronco camper build so the tailgate can close up on the rear of the camper.