After 40 yrs. and three EBs I still have no answer for a hot running engine when the Az. summer brings 110 degrees or more.The engine temp starts to climb over the thermostat setting when the air gets over 100.With an aluminum radiator and all normal over heating causes (lean mixture,over advanced timing , etc.) fixed, I'm looking at more extreme,or expensive measures.One is ceramic thermal coating of the combustion chambers and exhaust ports by Swain Tech Coatings.This would run about $500.Has anyone tried this? If so, to what effect?The other fix is louvers on the wheel wells and or the hood. Does this work?Yes I have a good fan shroud and have tried several fan types. None have helped.The engine is a 351w but the 289 and 302s were no less inclined to run hot.The summers here are HOT! Many vehicles of all types have the same problem when driven in hot whether,so my Bronc is not malfunctioning it's just trying to deal with an extreme condition that pushes things to the edge. I'm looking to get a cushion that will allow traffic jams and climbing grades to be less of a worry.











