• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

F250 shock tower mod poll

Did you cut, bend, and weld or leave them be?

  • Do like Jon said

    Votes: 6 25.0%
  • Leave them be

    Votes: 18 75.0%

  • Total voters
    24

Nightstick

Bronco guy
Joined
Feb 6, 2010
Messages
2,929
I'm fixin to weld on the front towers and just wanted to know who followed Jon's advise from the tech article and straightened the towers out by cutting, bending, and rewelding them. If you didn't are the tires contacting the shock, and if you could do it over again, would you do like Jon said?

Also, in my infinite wisdom I didn't mark the mounting point before I cut the old ones off. Did you just line up the bottom bolt holes and weld them on, then measure for the driver's side, or is there a better way of getting a more precise mounting point?
 

Landho

Sr. Member
Joined
Aug 10, 2008
Messages
443
Loc.
Cypress, TX
I didn't cut and straighten mine. I didn't mark before I ground/cleaned everything up either - I lined up to the hole on the passenger side, marked, took a measurement from a few areas and duplicated the lines on the drivers side. It came out pretty good.

I didn't straighten them, but - it wouldn't be hard to straighten them once they're installed if I have problems in the future...
 

Pedestrian

Bronco Missionary
Joined
Sep 10, 2008
Messages
2,299
Hey Kevin, just break out the welder and get to it ;)
I just lined up the holes and welded them in, didn't straighten them and have had no problems with tire contact.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
I have put them on 2 different builds. They did not hit anything. But making them straight wont hurt anything.
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
I straightened them out a bit, plus I lengthened them as well. I bought three, and made two mounts, 2" longer than stock. Running 14" short body Bilsteins.
Maybe someday I can use all this downward travel.%)
 

Attachments

  • IMG_2841.JPG
    IMG_2841.JPG
    89.4 KB · Views: 99
  • IMG_2843.JPG
    IMG_2843.JPG
    94.1 KB · Views: 110
  • IMG_2844.JPG
    IMG_2844.JPG
    104.7 KB · Views: 91
  • IMG_2847.JPG
    IMG_2847.JPG
    122 KB · Views: 106
  • IMG_2851.JPG
    IMG_2851.JPG
    116.3 KB · Views: 126
  • IMG_2912.JPG
    IMG_2912.JPG
    134.3 KB · Views: 118
OP
OP
Nightstick

Nightstick

Bronco guy
Joined
Feb 6, 2010
Messages
2,929
Thanks for the replies. I figured it wasn't an exact science, but just wanted to check first. I'm not worried about getting "maximum" travel, but the extra they add is nice.
 
Top