• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Finally got my 351!!

76MaBronco

Contributor
Bronco Guru
Joined
May 21, 2007
Messages
4,221
Loc.
Massachusetts
Bought a '94 Bronco off Craigslist that a very good friend found for me (Thanks Randy!!!)...had a few interesting loading moments, but got it home in one piece due to some other very good friends (Thanks Pete and John!!)...

broncobefore1.jpg


broncobefore2.jpg


broncobefore3.jpg


So it started, but ran very poorly, and to keep it running I had to dance to some speedmetal on the gas pedal just to keep it idling...sprayed some brake-kleen in the intake in short bursts and after a week of running in the back yard for an hour each day (it had 1/2 tank of old gas that came with it)...it actually started first shot and ran somewhat good...still a huge delay in throttle response, but it ran, so I didn't care...

Well, I ripped it's heart and guts out of it with the help of Pete and John and a friend that's not on here (Jamie) over the weekend. Sold what I didn't need, kept what I did...

broncoafter1.jpg


broncoafter2.jpg


broncoafter3.jpg


The Prize is all I was after...running 351, harness and accessories...I'll be swapping the upper plenum with a 302 Mustang plenum I traded for some doors back at the BYOB...Now I just need to rebuild it...

theprize.jpg
 

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
Looks good Steve! Is that on an engine stand? Hope it is a heavy duty one, looks like a lot of weight there!

Always did love taking stuff apart, putting them back together is a different story...;D
 
OP
OP
76MaBronco

76MaBronco

Contributor
Bronco Guru
Joined
May 21, 2007
Messages
4,221
Loc.
Massachusetts
It is...no idea if it's heavy duty or not...it didn't flex any more with the 351 than it did with the 302...okay, maybe a little more, but not much...

I'll be stripping it down soon, so I'm not too worried about it...take a bracket off, sandblast, primer, paint, hang on the board, repeat...got a good contact for a rebuild...4 years, 40,000 mile warranty, and free delivery for a long block, all for the low price of $995...
 

fatboy

Contributor
Glad to be here.
Joined
May 15, 2006
Messages
7,145
Loc.
New Hampshire
It is...no idea if it's heavy duty or not...it didn't flex any more with the 351 than it did with the 302...okay, maybe a little more, but not much...

I'll be stripping it down soon, so I'm not too worried about it...take a bracket off, sandblast, primer, paint, hang on the board, repeat...got a good contact for a rebuild...4 years, 40,000 mile warranty, and free delivery for a long block, all for the low price of $995...

Yeah I still cannot believe that. Actually took a quick look on CL to see if I could get a similar deal, you got me thinkin...


Did you get the carpet out?
 
OP
OP
76MaBronco

76MaBronco

Contributor
Bronco Guru
Joined
May 21, 2007
Messages
4,221
Loc.
Massachusetts
Not going to bother...I tore it up a little when I took the trans tunnel cover out...oops...kid hasn't called, and it's supposed to rain the rest of the week, so it's gone...by the time we got it loaded on the trailer on Sunday, swept up, cleaned up, and had a beer, it was 5:30...I was beat...I was still hurting this morning...sore and tired...I fell asleep on the chair watching TV around 8:30...was pulling the harness and planning to get it loaded and totally missed lunch...you've seen me, missing lunch is a big deal, so you know I was busy.
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
nice work you and your worker ants do! Sorry again i didn't make it, feel aful about it
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
still feel bad, wish i was there instead
 
OP
OP
76MaBronco

76MaBronco

Contributor
Bronco Guru
Joined
May 21, 2007
Messages
4,221
Loc.
Massachusetts
You can come down when it's time to do the 9"...which will be soon (couple weeks)...have to finish up on a couple work projects first...
 

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
be after the round up anyway....but that works for me.
 
Top