• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Finally started up after my frame off...

jdevon

Sr. Member
Joined
Jan 15, 2002
Messages
422
Loc.
Dallas Area
congrats on the accomplishment. that must be an incredible feeling. i tried to open the links, but to no avail.
 

73_Sport

New Member
Joined
Mar 21, 2005
Messages
24
Loc.
Salem
Congrats, there are so many members getting their EBs going again! Mine should run today after 14 months of upgrades/rust repair, mostly rust repair! %)
 

Hogback

Sr. Member
Joined
Sep 19, 2004
Messages
524
the links worked fine for me, sounds real good! thanks for sharing. Can't wait til i rebuild mine...
 
OP
OP
malcolmzilla

malcolmzilla

Bronco Guru
Joined
Mar 18, 2003
Messages
1,522
Loc.
Calgary, AB, Canada
Thanks guys.

Waiting on my PRP daily driver seats, not gonna bend my cage until I have the seats... In the meantime I have a dash to strip cut and weld and prep, all the plastic blasted bodyparts to weld/fill and get out for epoxy and undercoating and then hung and start filler work, and the new Painless harness to lay out and terminate, among a billion other "little things"... LOL

But yeah, turned the key and it fired up right away, thanks to Stlkikn for helping me sort out the stock harness (for now).

;D
 
Top