• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Firewall sealant

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
SO, I am finally getting after my bronco and putting it back together after paint.

What sealants are to best used on surfaces between parts on the firewall inside and under the hood?

Specifically, brake booster bracket to firewall or say the area around where the steering column passes through the firewall?
 
OP
OP
bigmuddy

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri

lars

Contributor
Been here awhile
Joined
Jun 29, 2001
Messages
3,334
Loc.
NorCal flatlands
Always open to your ideas and automotive experience's Lars! So, where if I might ask did you use this on your bronco?
I used it to seal small holes, irregular openings etc. For example when I added air conditioning, then made a plate to cover the old heater core tube opening. And mainly because I had the stuff on hand. It doesn't seem particularly sticky when you first apply it, but if the surface is well-prepped, have fun removing it later. It bonds tenaciously to bare stainless steel.
 
OP
OP
bigmuddy

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri

66CTBronco

Jr. Member
Joined
Nov 18, 2020
Messages
92
Loc.
New england
is that tube a urethane based sealant? silicone is awful, and when i replaced the rear windshield in my pickup it called for urethane sealant, works SO much better, and once i learned what it was i'm seeing it's used all over in the "real" world. i found urethane and sand was used for burying parking lot arm sensor wires, and so many other things. it has much better thermal characteristics, and actually STICKS to stuff including hair and skin!
c
 
OP
OP
bigmuddy

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
is that tube a urethane based sealant? silicone is awful, and when i replaced the rear windshield in my pickup it called for urethane sealant, works SO much better, and once i learned what it was i'm seeing it's used all over in the "real" world. i found urethane and sand was used for burying parking lot arm sensor wires, and so many other things. it has much better thermal characteristics, and actually STICKS to stuff including hair and skin!
c
No its not. Its a rope Butyl type rope product.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I use tacky tape for anything panel related that needs a gasket and/or some vibration resistance. Mostly because I have a case if it left from building my house lol. About 3x what we needed came with the building kit.
 
OP
OP
bigmuddy

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
Sorry its upside down. This arrived yesterday.
 

Attachments

  • 3M rope sealant.jpg
    3M rope sealant.jpg
    53.5 KB · Views: 132

Mark1911

Full Member
Joined
May 14, 2017
Messages
174
Strip-calk is the correct stuff sealing automotive joints. I used Dynamat Dynaliner, 1/4" thick. Easy to cut with scissors, tacky backing on one side and easy to cut to size. I used it as a gasket to seal the hydroboost to firewall on my build. GM used something similar to seal the Hydroboost to firewall joint. Really worked very well.

Mark
 
OP
OP
bigmuddy

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
Strip-calk is the correct stuff sealing automotive joints. I used Dynamat Dynaliner, 1/4" thick. Easy to cut with scissors, tacky backing on one side and easy to cut to size. I used it as a gasket to seal the hydroboost to firewall on my build. GM used something similar to seal the Hydroboost to firewall joint. Really worked very well.

Mark
Thanks for the tip. Looking at buying some type of dynamat or similar product for the firewall.
 
Top