broncbuster
Sr. Member
- Joined
- Jun 29, 2008
- Messages
- 414
I'd like to get some input from people who have experience with a detroit locker in the front. This is not a daily driven bronco. I have a detroit in the back, 4.56 gears, 35s. It's time to lock the front. This is kind of an all around bronco. Very straight body so my rock crawling is moderate because I'm not willing to give it rock rash. It gets run in very loose deep sand a few times a year, moderate stuff at Moab once a year or so, Moderate stuff at Brown's camp once a year or so. Off road snow a few times a year, snow on road very rarely. It gets driven on the street about 1/4 of the time, but I guess that doesn't matter because obviously it's 2 hi and hubs unlocked on the street. It gets trailered if I'm going more than about 30 miles to the trail head. I really don't want to go ARB, I don't want to spend that much and some friends have had reliability problems from air lines and/or internal air leaks, so I'm kind of against that. I've already got cromo axles from Wild Horses that have the larger spicer u-joints that will be going in at the same time. So basically I'm debating between a detroit vs a tru-trac or maybe something else that's high traction and tough. I guess the detroit will perform better, than a tru-trac but not sure about the down side it may have in the front. I guess these axles I got a deal on aren't the best, but better than stock, So maybe a detroit won't tear them up. I'll be going to a twin stick so I can shift out of 4 low as needed. Thoughts, experience and advice appreciated.











