• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Front locker question/advice

NC-Fordguy

Bronco Guru
Joined
Jan 30, 2006
Messages
1,317
Loc.
Bethel/Greenville NC
Last year I installed an eaton e-locker in a jeep wrangler as well as a pair of waggy narrow track dana 44s. for a local club member. The kid really likes the selectable feature of the e-locker.

Last time I looked at the e-locker around 15 years ago it was a two pin design and was turned off by that. Current ones are now 4 pin design which is a huge improvement.

Arb is awesome and while never have installed or had an OX but that too works well. My only reservation on the OX is it seems like every couple years a different company has it. Seems like it gets passed around faster than a fat chick at a frat party.

Selectable is definitely the way to go.
 

Digger556

Sr. Member
Joined
Aug 8, 2013
Messages
801
I'd like to get some input from people who have experience with a detroit locker in the front. This is not a daily driven bronco. I have a detroit in the back, 4.56 gears, 35s. It's time to lock the front. This is kind of an all around bronco. Very straight body so my rock crawling is moderate because I'm not willing to give it rock rash. It gets run in very loose deep sand a few times a year, moderate stuff at Moab once a year or so, Moderate stuff at Brown's camp once a year or so. Off road snow a few times a year, snow on road very rarely. It gets driven on the street about 1/4 of the time, but I guess that doesn't matter because obviously it's 2 hi and hubs unlocked on the street. It gets trailered if I'm going more than about 30 miles to the trail head. I really don't want to go ARB, I don't want to spend that much and some friends have had reliability problems from air lines and/or internal air leaks, so I'm kind of against that. I've already got cromo axles from Wild Horses that have the larger spicer u-joints that will be going in at the same time. So basically I'm debating between a detroit vs a tru-trac or maybe something else that's high traction and tough. I guess the detroit will perform better, than a tru-trac but not sure about the down side it may have in the front. I guess these axles I got a deal on aren't the best, but better than stock, So maybe a detroit won't tear them up. I'll be going to a twin stick so I can shift out of 4 low as needed. Thoughts, experience and advice appreciated.

If you're running in snow, you want selectable.

Getting out and locking/unlocking hubs get really old, really fast.

Personally I think the ARB has been worth every penny. I've own 4 and only one suffered a cracked blue plastic line due to severe ice buildup. And even at that, it was leaking down, but the locker still functioned.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
Sure, but if you wheel, I'd argue you're better off with a CO2 tank. It's no fun waiting 30 minutes after you finish a trail for your compressor to fill your tires... :p

pshaw. My York will air up 4 40" tires from 5 psi to 25 in nothing flat. ;)
 
Top