GRN_MEANIE
Sr. Member
- Joined
- Aug 2, 2005
- Messages
- 553
Just Wondering If Anyone Who Has Full Length Axles Is Glad They Did It Or If They Wish To Go Back To Stock. Also How About 9" Front W/ D60 Ends?
From what I've been told, you can run an offset 16" wheel to make up for the differance and would be the same as a stock axle with 12.50's on 10" wide wheels with a standard 4" back space.Skuzzlebutt said:If you do any street driving, how anal is your local constabulary or State Patrol? Do you have to pass annual safety inspections? Full widths in my area would cause alot of legal griefs. Fender flares need to be wide enough to completely hide the tire tread when viewed from above, and mud flaps are required too.
yeah full width with regular 15x8's is like 1/2 inch wider per side than stock axle with 15x10's.crab said:From what I've been told, you can run an offset 16" wheel to make up for the differance and would be the same as a stock axle with 12.50's on 10" wide wheels with a standard 4" back space.
GRN_MEANIE said:Wow, I Didn't Expect To Get Responses This Fast. Sounds Like I Should Go Out And See What Kind Of Trails I Like To Run. I Know That Rock-crawling Is Out For Now. Zzz.... I Just Have To Move More Than That. My 28splines Are Almost Toast So I Guess I'll Take The Easy Way Out And Keep The Stock Size For Now. But Why Go Dana60 Rear When A 9" Is Smaller And Is Built By Dragracers All Over To Handle A Ton Of Torque.






