• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Full Length Vs. Stock Axles

GRN_MEANIE

Sr. Member
Joined
Aug 2, 2005
Messages
553
Just Wondering If Anyone Who Has Full Length Axles Is Glad They Did It Or If They Wish To Go Back To Stock. Also How About 9" Front W/ D60 Ends?
 

TexasBronco

Bronco Guru
Joined
Sep 8, 2002
Messages
3,014
Loc.
Waterford, MI
I am about to convert to Full Width Axles and REALLY looking forward to the swap. Finding parts for the full width and newer axles is gonna be a lot easier and they can be built up really well. A 9" with Dana 60 ends is only needed if it is pretty much off road only, other wise a built D44 will do you fine.
 

68 Broncoholic

Bronco Guru
Joined
May 16, 2005
Messages
1,742
Loc.
WA
I'll end up doing the 9" with 60 ends some day. I;ve seen nothing but good things on them. You get the large ring and pinion of the 9" and the strong D60 outers.
Here in Washington most trails are too tight with trees, rocks, stumps etc to get a fullsize axle thru. Not sure about Texas but full width is definately more stable when off camber. The 9"/D60 will be cut down to your liking.
 

bigpappa

Bronco Guru
Joined
Mar 5, 2003
Messages
1,035
Loc.
Gardendale Al
I will be running full width dana 60's on my rig when it is finished. Also remember that there are several different widths of full width axle as well. Make sure when you are looking at axles you find out the wms to wms (wheel mating surface) It is also possable to change the width of Full floating axles by changing the hubs out with that from another axle. Do some searching around and you will be able to read for a good while.
 

crawln68

Bronco Guru
Joined
Oct 8, 2004
Messages
3,045
I agree. I'm full width and will never go back. As mentioned above, you can choose different widths depending on what set of full width axles that you get. You can also have them narrowed a little for a "semi full width" axle. You can also adjust the overall width by the back spacing that you run on your rims. This will also help or hurt your overall turning radius.

What kind of terrain/trails are you going to running on? If you have a lot of very narrow and tight trails, you may not want to be full width. If you have open roads, mud, snow, rocks then full width is the way to go! Good luck. :cool:
 

Skuzzlebutt

PhD, Dr. of Broncology
Joined
May 26, 2001
Messages
4,393
Loc.
Honeymoon Bay
If you do any street driving, how anal is your local constabulary or State Patrol? Do you have to pass annual safety inspections? Full widths in my area would cause alot of legal griefs. Fender flares need to be wide enough to completely hide the tire tread when viewed from above, and mud flaps are required too.
 

crab

Bronco Guru
Joined
Feb 23, 2004
Messages
2,268
Skuzzlebutt said:
If you do any street driving, how anal is your local constabulary or State Patrol? Do you have to pass annual safety inspections? Full widths in my area would cause alot of legal griefs. Fender flares need to be wide enough to completely hide the tire tread when viewed from above, and mud flaps are required too.
From what I've been told, you can run an offset 16" wheel to make up for the differance and would be the same as a stock axle with 12.50's on 10" wide wheels with a standard 4" back space.
 

TexasBronco

Bronco Guru
Joined
Sep 8, 2002
Messages
3,014
Loc.
Waterford, MI
TIme like this I am glad I live in Texas...the only law is a headlight height and that stands at 52" if I remember correctly. So alot of people with the super huge lifts just mount driving lights down under the bumper and they pass inspection w/o problem.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
crab said:
From what I've been told, you can run an offset 16" wheel to make up for the differance and would be the same as a stock axle with 12.50's on 10" wide wheels with a standard 4" back space.
yeah full width with regular 15x8's is like 1/2 inch wider per side than stock axle with 15x10's.
 

welndmn

Bronco Guru
Joined
Nov 12, 2001
Messages
2,112
Stock is about 59.
Full width 44 and 9 are 65
I have a 60 front and Van 9 inch, 69 and 67.
I am pretty wide, and have 2.75 BS wheels.
I am going to switch to a 4 inch BS wheel one day, but I love the width.
 

68 Broncoholic

Bronco Guru
Joined
May 16, 2005
Messages
1,742
Loc.
WA
My buddy runs hummer rims on his full size D60's which mostly fit in the wheel wells of his 69. Only problem he has is the hubs sitck way out and get hung up on rocks etc.
 

DBrown

Full Member
Joined
Jul 29, 2005
Messages
242
Loc.
Bowling Green, KY
the whole reason to go full width is to keep the track width, I would not hide it with different rims.

I run full width on my BII and love it, but in KY we don't have lift laws or a smogger. off road you will notice a big difference in stability when the suspension starts flexing and you get into weird spots. down fall is you will be wider and might not fit in between trees that well.

I have debated swapping over to full width but the truck I am going to get on sat. is uncut so I doubt that will happen.
 

Gummi Bear

Bronco Guru
Joined
Jul 8, 2003
Messages
3,647
Full width is cool, if you run places where it won't be a handicap. I like the tight, technical trails. Right now, my track width is 62 in the front and 60 in the rear, it's absolutely perfect. I will go to a wheel with slightly shallower backspacing, but nothing extreme.

A lot of the trails I like to run, a full width rig with shallow backspacing (~90" wide or more) won't fit without having a fit. And turning that mess, fuhgettaboutit! I can maneuver all over the trail when they're still farting around with an obstacle. They do kick my butt on big climbs and larger obstacles, but I'm convinced that some more wheelbase will help me tremendously in these areas. (I'm shooting for ~100" WB)

I will keep my rig at 76" wide or less from now on, not only because that's how wide my trailer is, but also because I can get around on the trails that I enjoy much easier. If I were to build custom axles, they'd be 62" WMS-WMS without thinking twice.
 
OP
OP
GRN_MEANIE

GRN_MEANIE

Sr. Member
Joined
Aug 2, 2005
Messages
553
Wow, I Didn't Expect To Get Responses This Fast. Sounds Like I Should Go Out And See What Kind Of Trails I Like To Run. I Know That Rock-crawling Is Out For Now. Zzz.... I Just Have To Move More Than That. My 28splines Are Almost Toast So I Guess I'll Take The Easy Way Out And Keep The Stock Size For Now. But Why Go Dana60 Rear When A 9" Is Smaller And Is Built By Dragracers All Over To Handle A Ton Of Torque.
 

tonto

Bronco Guru
Joined
Oct 16, 2001
Messages
1,484
I’ve been running full width for several years now and would never go back.
I didn’t like the track width with standard 3.25” back spaced wheels so I run 4.5” of back spacing on my wheels to take some of the width out.
Stability when running off camber obstacles is excellent, with the deeper back spacing the center line of my wheel is closer to being right over my ball joints and improved my turning radius, it’s actually tighter than Early Broncos with stock width axles.
Also my axles articulate much better than with the stock width axles.
It’s a great way to get 31 splines in the rear and have a hi-pinion diff in the front, I can’t think of one negative issue I’ve had running full width axles.
Rear axles shafts are equal length so one spare fits both sides.
 

Attachments

  • Duran Canyon 8.jpg
    Duran Canyon 8.jpg
    26.5 KB · Views: 134
  • Duran Canyon 10.jpg
    Duran Canyon 10.jpg
    24.5 KB · Views: 146

bigpappa

Bronco Guru
Joined
Mar 5, 2003
Messages
1,035
Loc.
Gardendale Al
GRN_MEANIE said:
Wow, I Didn't Expect To Get Responses This Fast. Sounds Like I Should Go Out And See What Kind Of Trails I Like To Run. I Know That Rock-crawling Is Out For Now. Zzz.... I Just Have To Move More Than That. My 28splines Are Almost Toast So I Guess I'll Take The Easy Way Out And Keep The Stock Size For Now. But Why Go Dana60 Rear When A 9" Is Smaller And Is Built By Dragracers All Over To Handle A Ton Of Torque.

The main reason I am going with a 60 or 70 rear is because there is not a full floater 9" rear. Sure you could make a hybrid but replacement parts would not be easy to find.
 
OP
OP
GRN_MEANIE

GRN_MEANIE

Sr. Member
Joined
Aug 2, 2005
Messages
553
Meaning That I Would Have To Replace More Wheel Bearings? I'm Gonna Go 35 Spline 9" In The Rear, And Figured I Would Eventually Go W/ The 9"d60 Front. Figuring That It Would Be Nice To Be Able To Swap Center-sections. But I Haven't Seen Much In The 9"d60 Axles.
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
What is the lenght of a full width rear 9" housing flange to flange?

I got a Lincoln 9" with rear discs sitting at a friends house.
Would it be the same lenght? I know the bolt pattern will need to be drilled.
 

RT

Bronco Guru
Joined
Sep 29, 2003
Messages
1,037
What about the offset of the 9" in the rear ?
I haven't measured yet , I have a 82 F150 4x4 and I was thinking of swapping the 9" to the Bronco . Mine is a daily driver ,so I don't want any extra driveline vibrations from the diff not being lined up with the transfer case.

Anyone use full width on their DD ?
 
Last edited:
Top