Grill letters pdf install template

[RedBank]

All of the old links I find to the pdf templates for installing or drilling the holes for the grill letters no longer work. Does anyone have the .pdf to share?

Sent from my SM-G975U using Tapatalk

 

[hankjr]

https://classicbroncos.com/forums/showthread.php?t=287218

try this one

Hank

 

[Bronco4x4]

I used those recently (printed a while ago). I marked the areas to drill with the templates then held up the new grill letters afterwards. I did adjust the drill marks a little to fit better.

 

[RedBank]

https://classicbroncos.com/forums/showthread.php?t=287218



try this one



Hank

This is one of the pdf's that I couldn't open.

Sent from my SM-G975U using Tapatalk

 

[hankjr]

I just opened it. You can’t?

Hank

 

[RedBank]

I just opened it. You can’t?

Hank

I can open the link to the post but when trying to open the pdf inside that post I get an Adobe msg that the file cannot be opened because it is corrupt or damaged.

Sent from my SM-G975U using Tapatalk

 

[hankjr]

I can open the link to the post but when trying to open the pdf inside that post I get an Adobe msg that the file cannot be opened because it is corrupt or damaged.

Sent from my SM-G975U using Tapatalk

here are screen grabs of two of the pages from that post

Hope this helps you out. when i did mine, i did it by eye FWIW

Hank

 

[RedBank]

I can see the pictures. I am looking for the pdf that I can print off that will be to scale.

Sent from my SM-G975U using Tapatalk

 

[hankjr]

I can see the pictures. I am looking for the pdf that I can print off that will be to scale.

Sent from my SM-G975U using Tapatalk

View attachment Grill Letters (3).pdf

here is the .pdf

Hank

 

[Tosh]

I am about to install my grill letters as well and thought I create a pdf template for everyone to use. You can print it out. There is a line with dimensions for reference, as it needs to be printed with 100% size. Please check the fit before use, don't know if all grill letters are the exact same size. Hope this helps.

 

[RedBank]

These aren't what I was looking for but I can make them work. Thanks guys.

The template I was looking for had all the letters on a page laid out horizontal to scale. You could print out the page and hold the page up to the grill and mark all the drill holes. If page was level then all the letters would be level.

Again, thanks!!

Sent from my SM-G975U using Tapatalk

 

[Bronco4x4]

The one I printed from this site a while ago was for each individual letter.