• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Half cab sliding rear window

OP
OP
doghows72

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
Thanks guys, I'm like a proud papa.
Corey did you get the email with the pictures?
 

Elite Broncos

Full Member
Joined
Dec 13, 2014
Messages
311
Loc.
San Diego area
oh ok ... I was thinking down the line like the late 90 FSB have. 3rd brake in the middle and clear left and right that illuminate the bed when you open the door or via separate switch on the dash !?

I have this in my 92 full size Bronco preruner, not really that bright with LED bulbs even
 
OP
OP
doghows72

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
I started with an 1986 Ford Ranger standard cab 4x4 factory sliding rear window. It had aluminum channel for the center and plastic caps around the ends. Center bars were held in with screws top and bottom.
It actually worked out way better than expected so definitely the perfect window to start with.
 
OP
OP
doghows72

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
My bad I spaced out. Yes the brake light is done, I'll get a pic or two tonight. Be busy working on another project but I'll put that in another thread. I'll just say it is a Hammer inspired build.
 
OP
OP
doghows72

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
Here is finished product. Slider done, third brake light done, pinstriping done. I'm very happy. Now onto the next project!
 
Last edited:

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
..SO Doghouse ..A few questions.
1.you used a scrap yard window from the wrecking yard to start with.
2.Where did you get the big window gasket.
3.Are the 4 corners square are almost 90* angles. I've not seen under my gasket. or I've never had mine out before.
4. For Glass I'm assuming I could go to my local home window glass man. I just $9000with him for windows for my house so I'll bet he'd cut me 3 pieces of glass.
5. Was the angle or the curvature of the Bronco & the 86 Ranger Cab the same shapes.
where the stock Bronco gasket works on the Bronco cab metal & it also seals correctly to the Ranger frame works.
6. My top is bed linered. So in my mind none would ever want it but me. But then I don't plan to ever take it off. But I've wondered if IT'D NOT BE EASIER to just cut the back of a pick up cab from something in the wreaking yard. Graft it onto my Half cab. That would basically be one great big weld in an oblong circle. AFTER It was welded & cleaned up then just re apply the under coating. & Some kind of smoothing work to the inside & repaint it back Wimbledon White .
7.. I can't think which would be the best for me. I don't think it'd bother me for the back of my Bronco cab to not have the perfect Bronco look. As my Bronco is so custom ed out already.
 
Top