• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Half Cab sliding window

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
... Man I wish one of our vendors would build a sliding window for our METAL Half cabs with a new gasket of course.
....... Since I'm a Tight Wad .. I want the price range to be under $199.95 retail. What's your thoughts.
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
... You maybe correct .. Since so many items from the Bronco & the early ford truck or even the Mustang seats interchange .. A few days ago I saw an old Ford Truck about a 1966 setting on the side of the road for sale .. I couldn't see anything other than the sliding rear window.. But when I got up to it I could see different corners ...
... I want a rear sliding window .. Either one slider or a split slider no problem... Just a 8 or 10 inch slide .. Some air & I can tosh my beer can into the bed .. Yes my Bronco stays on my Ranch .. I don't drink & drive .. I just check cows & drink.
 

roundhouse

Bronco Guru
Joined
Sep 5, 2003
Messages
2,956
Can't be too hard to make one from Lexan or something easy to cut
Or one that slides down like some pickups

Half cabs have a curved rear window?
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Round house where is the curved glass your talking about . If your in reference to the top curve .. That's no issue just a top aluminum rail with a glass in the center then the glass can be straight.
 

roundhouse

Bronco Guru
Joined
Sep 5, 2003
Messages
2,956
Round house where is the curved glass your talking about . If your in reference to the top curve .. That's no issue just a top aluminum rail with a glass in the center then the glass can be straight.

Post #2 mentions curved glass
 

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
I am working with my local glass guy right now. He makes sliding windows for boats?? But he thinks he can make one for my bronco designs half cab.
The track on the top would be thicker in the center to take the top curve out and make the glass straight. We will see how it goes and I'll post up when done. Maybe I can talk him into building a few if the turn out nice.
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
.. That'd be cool. A glass shop in Cleburne Tx told me years ago he could build me on . But when I went back last years they just laughed at me.
 
Top