• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Help Decode Engine Casting Number

xtremeyj

New Member
Joined
Mar 29, 2008
Messages
13
Hello I finally found my casting number and need to know what it is.

D9AE-6015-ED12
8E6

D9 = 79
A = Ford or Galaxie (???Anyone know??)
E - Engine

6015 = ??Anyone Know??

ED12 = Rev (??Anyone Know??)

8E6 = 8th year, Month of May, 6th Day.

Just wondering if I truely have a 351w or what??? Thanks...
 
OP
OP
X

xtremeyj

New Member
Joined
Mar 29, 2008
Messages
13
hi steve - thats to funny. I will check on it tomorrow and get back to you.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Theres nothing about the casting number that actually tells you engine size the 6015 is for engine block its the same number for a 289 or a 460.
A should just be for Ford as there are no 79 galaxies 79 is the year. Revsions are not well published but just let you know its improved over the orginal casting.
Your best bet to ID a 351W is to look at the area where the distributer goes a 351W will have about a 1in step up to the manifold valley. If its a 302 then the dist mounting surface is almost level with the manifold valley might have a small step.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Unfortunatly there is no great magic about the casting numbers. Biggest one is D9 or a '79 design (which may have been carried on for a few more years if nothing changed).

You will simply need to phisically ID it. Is the timing cover a couple inches thick and made of aluminium or a flat piece of steel? In '79 the flat steel would be a 351M or 400
If aluminium cover count the bolts on the valve cover, 6 is a Windsor (302 or 351). If not it could be a big block. I think that takes care of the 3 main engine families in '79 era.
For 302 vs. 351 you can tell by the width of the intake mounting bolts, the distance between the distributor hole and the top of the lifter valley, and if a bare block if the head and main bolts are 7/16 or 1/2" threads
 
OP
OP
X

xtremeyj

New Member
Joined
Mar 29, 2008
Messages
13
We measured a 351w intake last night and mine matched up with that. I feel now that it is truely a 351w. Thank you all for your help.
 
Top