• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Help Identifying PS Pump and Hydroboost

dannyd

New Member
Joined
Jan 26, 2022
Messages
3
Loc.
Bastrop, TX
I could use some help identifying what this power steering pump and hydroboost setup came out of as the previous owner didn’t seem to know. I’m in the process of replacing the power steering gearbox and I pulled the pump out at the same time to clean it up a bit. Thought it might have been from an 80s Bronco or F150 but just wasn't sure.

I’m also wondering what fluid to run in this power steering pump as I’ve seen some suggestions that some of the older factory Ford pumps should be using ATF rather than PS fluid.

For the brake setup, the master cylinder is stamped 1 5/16 but other than that I don’t see any useful markings on it or the hydroboost.

Any help at all here would be much appreciated.
 

Attachments

  • IMG_7868.jpg
    IMG_7868.jpg
    337.2 KB · Views: 155
  • IMG_7869.jpg
    IMG_7869.jpg
    382 KB · Views: 121
  • IMG_7890.jpg
    IMG_7890.jpg
    238.2 KB · Views: 116
  • IMG_7891.jpg
    IMG_7891.jpg
    211.4 KB · Views: 156

Eoth

Bronco Guru
Joined
Mar 10, 2004
Messages
1,692
Its a Saginaw pump that has been modified for duel return (second port on "neck" was added). I'm pretty sure its an astrovan hydroboost. Standard GM power steering fluid will be fine. I run synthetic Red Line fluid due to mine running hot because of my steering is fighting my front locker..
Ok... I retract that "astrovan statement"... Upon further review, Im going to say that the Master Cylinder is a "Dorman Brake Master Cylinder". Specifically Part #M39876. That part number just happens to fit the hydroboost to 333 different Ford makes, models and trims from 1988 through 1997 mostly F-350.
 
Last edited:

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
The hydroboost is from a '99-'04'ish Ford Super Duty Powerstroke diesel pickup - the blue accumulator and master cylinder reservoir shape and diameter are clues there.

The pump is an old Saginaw pump, and I say old because that type of reservoir hasn't been used for a long time. Looking at the side view of the pump, it appears to be one of the 20-6244 conversion pumps due to the big metal monstrosity on the front of the pump behind the pulley. These were pumps sold by Cardone (an auto parts rebuilder) that were made to bolt into the stock Ford Thompson pump bracketry. They were an interesting idea and pretty popular with the Bronco crowd back in the day because they allowed you the benefits of a Saginaw pump without having to change brackets. This was a big deal back when conversion brackets like every vendor sells were not yet available. One downside to this pump is that the bearings, etc. tend to wear out faster due to that really long pump shaft putting a greater load on them. Cardone stopped offering them a dozen or more years ago.

As for fluid, conventional power steering fluid (GM fluid from the dealer is awesome) will be just fine.

Todd Z.
 
OP
OP
dannyd

dannyd

New Member
Joined
Jan 26, 2022
Messages
3
Loc.
Bastrop, TX
Awesome, thanks guys! Really appreciate the detailed explanations. I'll likely just replace this pump while it's out - one less thing to deal with later.
 

66broncoCT

Contributor
Full Member
Joined
Feb 6, 2012
Messages
323
Loc.
Torrington, CT
Awesome, thanks guys! Really appreciate the detailed explanations. I'll likely just replace this pump while it's out - one less thing to deal with later.
Just to let you know no one makes that pump, you’d have to go back to the ford Thompson pump or get different brackets for a true Saginaw pump. And if you do decide to replace it anyway I’d be really interested in buying that conversion one off you.
 
OP
OP
dannyd

dannyd

New Member
Joined
Jan 26, 2022
Messages
3
Loc.
Bastrop, TX
Ya I meant buy a newer Saginaw style pump from one of the vendors. Send me a message and we’ll work something out.
 
Top