• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Help ID'ing Brake Booster Chevy/Ford

patrickk1

Jr. Member
Joined
Mar 7, 2011
Messages
135
Loc.
Cambridge
What's the mounting width on the chevy and ford brake boosters master cylinder mounting studs? I have read plenty of times that here is a difference and different master cylinders can be filed to fit to mix the different brand parts.

I am trying to change my master cylinder from disc/drum to disc disc and upgrade the bore size. I have an older wildhorses disc brake setup that came on a bronco I bought. I don't think wildhorses makes this version anymore, but the toms bronco parts one looks identical to mine. I am just trying to figure out the mounting widths so I can just buy the correct ford or chevy master cykinder.
 
OP
OP
P

patrickk1

Jr. Member
Joined
Mar 7, 2011
Messages
135
Loc.
Cambridge
Here the master/booster. Looks like 3.25" spacing on the booster studs.

006CCE7F-2782-452D-A31E-37E475202E83_zpszdurnwbs.jpg
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
A general rule of thumb is that Ford/Dodge spacing is 3.2" and GM is 3.4". Being an old car guy, the way I remember is I always think of '32 Fords when recalling the spacing.

HTH,
Todd Z.
 
OP
OP
P

patrickk1

Jr. Member
Joined
Mar 7, 2011
Messages
135
Loc.
Cambridge
A general rule of thumb is that Ford/Dodge spacing is 3.2" and GM is 3.4". Being an old car guy, the way I remember is I always think of '32 Fords when recalling the spacing.

HTH,
Todd Z.

Perfect! That's exactly what I was looking for!
 
Top