• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Help! Is this clean enough?

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
I spent this past weekend cleaning this surface for the lower intake manifold. Does it look clean enough? Ready for the gasket and intake manifold?
What's the best gasket you guys recommend? Is it a mistake to use or not use permatex grey?
Doing a cam swap and working on the front now. Cleaning has been the biggest pain.
 

Attachments

  • 20230717_165755.mp4
    66.7 MB
  • 20230717_172004.mp4
    46.3 MB

Mikes79Bronco

Jr. Member
Joined
May 26, 2023
Messages
132
Loc.
Homer Glen, IL
Yes, you are as clean as you are going to get. I always use whatever color permatex gasket maker I have open at the time (I don't think the color really matters) around the water ports.
 

Itsa67

Contributor
Sr. Member
Joined
Jan 26, 2006
Messages
470
Surfaces look really clean. I usually use Permatex Ultra Black but I would imagine the grey is fine. If you use a Fel Pro gasket I would recommend one with the steel core as the others don't seem to hold up well anymore.
 
OP
OP
Mark

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
Surfaces look really clean. I usually use Permatex Ultra Black but I would imagine the grey is fine. If you use a Fel Pro gasket I would recommend one with the steel core as the others don't seem to hold up well anymore.
Felpro says not necessary to use any sealer other than in the corners where the pieces meet. This is against my instinct and do as you suggest. hmmm
 

Mikes79Bronco

Jr. Member
Joined
May 26, 2023
Messages
132
Loc.
Homer Glen, IL
Felpro says not necessary to use any sealer other than in the corners where the pieces meet. This is against my instinct and do as you suggest. hmmm
That may work for a new block with clean mating surfaces but from your videos it looks like you have pitting around the water ports which is pretty normal in my experience. I would definitely use rtv on that block.
 

El Kabong

Contributor
Driving stuff Henry built
Joined
Oct 8, 2009
Messages
1,559
I use a single edge razor blade to do the final scrape of a gasket surface. It catches on stuff you can't even see, so you know to scrape that area until the blade slides smoothly.

My dad's method was to lay a mill smooth file flat on the surface & lightly file it. It shows any remaining junk & knocks down any burrs. It's important that the file remains flat on the surface.

I use either or both methods, depending on the location & access. I can tell more by feel than by eye.
 

Glass Pony

Contributor
Bronco Guru
Joined
Feb 13, 2012
Messages
1,954
Loc.
Sussex County Delaware
My dad's method was to lay a mill smooth file flat on the surface & lightly file it. It shows any remaining junk & knocks down any burrs. It's important that the file remains flat on the surface.

I use either or both methods, depending on the location & access. I can tell more by feel than by eye.
This. You would be surprised how many raised up burrs around bolt holes or gasket surface edges that you can't see.
I use a honing stone with a little oil instead of the mill file but like El Kabong says, "you can tell more by feel than eye.
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
clean enough...
 

Attachments

  • 352651924_244544881527302_6222376846815799138_n.jpg
    352651924_244544881527302_6222376846815799138_n.jpg
    49.1 KB · Views: 57
Top