• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Help with Centech and CD/Radio Install

Canes77

Jr. Member
Joined
Dec 16, 2004
Messages
97
Can anyone send me a diagram/some pics or exactly what wires I would use for a radio install with the centech wiring harness-I have read some of the previous tech articles -I need a little more guidance and I want to make sure I got this down before I go messing witht the new harness. Any help would be greatly appreciated-i have a few hours today I want to get this thing rocking!
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
The only thing I can tell you about hooking up a radio or CB is that Centech does provide a wire under the dash for the radio. Not sure if there are other wires available or not?

I added a seperate painless fuse block awhile back that gives me like 4 constant hot, and 4-5 hot with the key on.

Ben
 
OP
OP
Canes77

Canes77

Jr. Member
Joined
Dec 16, 2004
Messages
97
Thanks big muddy

I still really could use some more help - does anyone have any diagrams, etc...?
 

kbldawg

Bronco Guru
Joined
Jun 26, 2007
Messages
1,492
Loc.
Marshall, AR
All you need is a ground, constant hot, and key on hot. The rest of the wires are for speakers and of course the antenna.

Like bigmuddy said, Centech has a "radio" circuit which I believe was a "key on" hot. It's an orange wire with a plastic connector on the end of it. Just find a constant hot and ground and your golden.

-Chad
 
Top