• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Help with rear cutouts

BRONC-OH

Full Member
Joined
Feb 24, 2009
Messages
181
Loc.
Wintergreen, Va.
The rear cutouts on my truck are off center to the back tire. P.O. installed some plastic rigid flares and cut as far forward as the body brace behind the doors.

I guess my question is what is the easiest way to fix this? It seems that the cutout only needs to be a few inches forward. Would new flexible flares allow me to open the front of the cutout more? I could sheet metal the rear of the opening (last resort) but if i do that I'm going LUBER.

Advice?

Buster
 

stock1970

Bronco Guru
Joined
Apr 2, 2008
Messages
1,793
Loc.
Olathe, Kansas
un attach the flares you have now at the front,on top, and just a little on at the rear where it turns to begin the slant down at the rear.. then see if they can open it up some, I got my flares to open up about 2 inches further forward to make room for 35s, I had to cut a slice of fender out in the front eleminating the body brace.. granted the flare is 1/2 inch short of making all the way to the bottom of the fender at the front but no one will notice..
 

JGZ

Sr. Member
Joined
Dec 3, 2010
Messages
360
Bronco Hut carries larger size fiberglass flares to solve this problem.Rear flare goes from the rocker panel seam to the corner post seam and they also add a little hieght and width.Mellisa also carries the front set too.If you need pics.Gimmie a pm JGZ
 
OP
OP
BRONC-OH

BRONC-OH

Full Member
Joined
Feb 24, 2009
Messages
181
Loc.
Wintergreen, Va.
Here is the rear
RearCutoutOffcenter.jpg

The cutout is way too far back IMO

Buster
 

JGZ

Sr. Member
Joined
Dec 3, 2010
Messages
360
Gimmie a e-mail addy and I can send pics. of larger fiberglass flare.JGZ
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,124
Loc.
Cuchara, CO
Those look like Bushwhacker's or Gorilla Warflares. In either case they should stretch forward some (the Warflares more so than the Bushwhackers). I am curious what the other side looks like in relation to the gas cap(s)??
 
OP
OP
BRONC-OH

BRONC-OH

Full Member
Joined
Feb 24, 2009
Messages
181
Loc.
Wintergreen, Va.
Those look like Bushwhacker's or Gorilla Warflares. In either case they should stretch forward some (the Warflares more so than the Bushwhackers). I am curious what the other side looks like in relation to the gas cap(s)??

Here ya go
RearCutoutDrivers.jpg


I'm thinking Bushwacker's. these are more of a rigid plastic
 
OP
OP
BRONC-OH

BRONC-OH

Full Member
Joined
Feb 24, 2009
Messages
181
Loc.
Wintergreen, Va.
Bigger tires are definitely in the plan. Just gotta get all the body work done first. Looks like war flares or some other "larger" opening flare is gunna be the answer.

Thanks
Buster
 
Top