• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hey, newbie alert

ugly_od_eb

Jr. Member
Joined
Jul 14, 2008
Messages
66
Loc.
Moyock, NC
Thought i would get some pointers and share some ideals since its hard to find other eb owners, i know one down the block, and ive seen a handfull in the area (all pretty looking....%) ) So i built a purpose built beating machine from a stock 75 wagon. Got it for $3500 running/moving cut with 32" mud kings, custom front bumper, and a hurst floor shifter. Then we added dual flowmaster 40series exhaust, 4.56 gears trutrac front, detroit locker rear, new LUK clutch, WH twin stick mod, 1" body, 5.5" superflex bullet proof lift w/ 12" extended radius arms, Full best tops soft top with tinted windows, warflares, 37x12.50 IROK swampers, WH wrap trap traction bar, 670cfm holley w/ weiand stealth intake. I recently entered it in a mudbog and broke a motor mount thus cracking my exhaust manifold and causing nitemareish sounds from under the floor board...., So if yall need a tech article about changing out motors mounts i can document it for yall, also doing crossmember mounts. Ok enough blabin... here some pics enjoy.
http://i142.photobucket.com/albums/r112/vic_the_mercyless/SSPX0223.jpg
http://i142.photobucket.com/albums/r112/vic_the_mercyless/SSPX0222.jpg
http://i142.photobucket.com/albums/r112/vic_the_mercyless/SSPX0225.jpg
http://i142.photobucket.com/albums/r112/vic_the_mercyless/PDC_0118.jpg
http://i142.photobucket.com/albums/r112/vic_the_mercyless/SSPX0164.jpg
http://i142.photobucket.com/albums/r112/vic_the_mercyless/Untitled.jpg
 
OP
OP
ugly_od_eb

ugly_od_eb

Jr. Member
Joined
Jul 14, 2008
Messages
66
Loc.
Moyock, NC
Welcome to the site, looks like a nice build you have going there. What motor have you got in it?

stock 302, but i got 68' small chamber heads with chevy 202 valves, studs, springs, and im going to combind that with a luntai bracket cam (.512 290/290) roller rockers and motorcraft shorty headers (thanks to a fellow member for $free.99 :p )
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
14,746
Welcome to the site...

Learn how to post your pics like this.............

Untitled.jpg
 

ugly74

Bronco abuser
Joined
Apr 17, 2006
Messages
2,847
Welcome, and I dont think there is an ungly EB.

I've never seen an ungly eb either. Ugly though...that I've seen.
but even Ugly Broncos still have fine form. I'd rather drive an ugly bronco, than a pretty jeep. and I do!
 

4x4babygirl

Bronco Goddess
Joined
Apr 11, 2005
Messages
1,744
Loc.
Tanasi
well i ment too post it correctlly sorry.... but links are just as good arent they?

Yes they are. You can post the pic rather than the link by putting the URL for the image inside images tags (
).

SSPX0222.jpg


Welcome to the site! ;D I think that's a pretty Bronco. You ain't seen ugly yet, darlin'.
 
OP
OP
ugly_od_eb

ugly_od_eb

Jr. Member
Joined
Jul 14, 2008
Messages
66
Loc.
Moyock, NC
Thank you, but just to add im a newbie to this forum, but not forums in general, i belong to a dozen of them and have a youtube account with a few videos of my quad and the bronco (crappy cell phone vids...) but none the less
www.youtube.com/LIMWhiteboy4life enjoy... :p
 
Top