• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hole in Driver's Side A-Piller

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
I was asked what the hole near the top of the A-piller was for. Some reference to a temperature sensor for emissions has been mentioned on this forum. I dug into it and found an old Ford 1971 Ford Technical & Service Handbook for the TRS system. Here is page 4;https://www.fordification.com/library/picture.php?/3208/category/329. The '70s emissions equipment drove me nuts back then. Most of it made the engine run like crap. No power and bad MPGs.
 

EPB72

Contributor
Bronco Guru
Joined
Jul 13, 2019
Messages
1,216
Loc.
Pleasant Hill, CA
My 72 has it ,but the rest of the system is long gone ..I can dig up the temp swtch and and take a pic if you like..
 

RonJones

Contributor
Full Member
Joined
Jun 30, 2001
Messages
347
My 73 has it, but with horizontal mounting holes with a rubber plug where the temp sensor was.
 
Top