Holley sniper plug wire recommendation

[tampabronco]

Looking for a 8.5 mm plug wire to run with my sniper efi. I have a stock 74 302 engine and stock distributor. Anybody with a similar setup have a suggestion?

 

[ngsd]

MSD Super Conductor

 

[Broncobowsher]

Ford Motorsports wires. Need the 1977 style cap/rotor/adaptor, all super common parts from any parts store.

 

[tampabronco]

Adapter?

Ford Motorsports wires. Need the 1977 style cap/rotor/adaptor, all super common parts from any parts store.

 

[DirtDonk]

It’s the part that snaps on to the distributor body, that the newer style distributor cap snaps on too.
It’s use allowed Ford to basically use the same distributor body from the early points style from at least the mid-sixties all the way to the end of distributor use in the mid-nineties.
Same distributor body, bigger cap with wider spaced and arguably better later style towers.

 

[tampabronco]

It’s the part that snaps on to the distributor body, that the newer style distributor cap snaps on too.
It’s use allowed Ford to basically use the same distributor body from the early points style from at least the mid-sixties all the way to the end of distributor use in the mid-nineties.
Same distributor body, bigger cap with wider spaced and arguably better later style towers.

Would I need to switch to a male distributor from a female?

 

[Broncobowsher]

Would I need to switch to a male distributor from a female?

That is what the adaptor, cap, and rotor do.