g8rb8t
Bronco Guru
- Joined
- Feb 23, 2008
- Messages
- 1,476
Final steps of the Ch*vy disk conversion and I noticed in the two threads below the reference to a residual check valve to remove from the rear MC chamber. I used a #6 screw and turned 2-3 times and pulled but nothing is pulling out except the screw. Hopefully didn't screw up the MC.
How can I tell if I have this or not? Do all drum/drum MCs have this?
My MC was replaced by a shop about a year and a half ago. So close to being done!!
See final steps section in this link
http://earlybronco.com/Library/CustomFrontDiskBrakeConversion.pdf
http://classicbroncos.com/forums/showthread.php?t=139861&highlight=Residual+check+valve
How can I tell if I have this or not? Do all drum/drum MCs have this?
My MC was replaced by a shop about a year and a half ago. So close to being done!!
See final steps section in this link
http://earlybronco.com/Library/CustomFrontDiskBrakeConversion.pdf
http://classicbroncos.com/forums/showthread.php?t=139861&highlight=Residual+check+valve