How To Convert Your 1969-1977 Early Bronco Front Turn Signals To The Factory Flush Mount 1966-1968 Style

[1969]

In this video I show you how to convert your 1969-1977 Early Bronco front turn signals to the 1966-1968 factory flush mount version. The parts needed are linked below.

Conversion brackets:

https://www.wildhorses4x4.com/early-bronco-turn-signal-grill-adapters

1966-1968 Turn signals (Amber or Clear lenses):

https://www.wildhorses4x4.com/66-68-ford-bronco-front-turn-signal-lens-bucket-assembly-amber

https://www.wildhorses4x4.com/66-68-ford-bronco-front-turn-signal-lens-bucket-assembly-clear

 

[thegreatjustino]

ToddZ's tech article has been here on the board for over a decade:

The "Alice" Turn Signal Lens Modification

Tech article by Todd Z. (toddz69) They're bulbous, ugly, protruding pieces. They look out of place, like they don't fit, as if they were some designer's afterthought. They're often cracked, broken, or missing. Their gaskets are usually cracked...

classicbroncos.com

 

[1969]

ToddZ's tech article has been here on the board for over a decade:

The "Alice" Turn Signal Lens Modification

Tech article by Todd Z. (toddz69) They're bulbous, ugly, protruding pieces. They look out of place, like they don't fit, as if they were some designer's afterthought. They're often cracked, broken, or missing. Their gaskets are usually cracked...

classicbroncos.com

Nice! Now there’s a video as well.

 

[toddz69]

I did my modifications before those plates were a thing - it's an easier conversion now that they exist. Both ways work pretty well, I think.

Todd Z.

 

[tasker]

USED Todd's/Tom's instructions when I did mine...a looooong time ago!

 

[Shimmy]

appreciate the video! always nice to see DIYers updated with clips. many times things are easier to explain or show with a video vs pictures and text.

 

[nvrstuk]

I bought some SUPER BRIGHT LED boards from TBP in Oregon, then made my own buckets ( I pulled my small light '68 grill 2 decades ago) that are only 3/4" deep since my Super Duty cooler is up tight against them. Work great. Clear lens of course and the LED's are super intense yellow for turn and white for park.

 

[trailerjack]

I used Todd’s instructions for mine and turned out great.