• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

How to mount throttle position sensor

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
After checking with Baumann to be sure I can do a 4R70W swap,I'm not sure how to best mount a throttle positioning sensor on a Holley or AFB. In fact the only carb mounting system I can find is a choke housing type that appears to protrude into the stock air cleaner. The Holley mount is the only one I can find. Holley did a TPS mount for the 2300 2V replacement for the 80s VV Motocraft. A 4v Holley TPS mount could be fabricated from one of those. Is there a better way?
 

gearida

Bronco Guru
Joined
Jun 8, 2007
Messages
1,428
Loc.
Newburgh, IN
Why would you? The only reason I can think that you are asking is you are putting electronic throttle or somehow planning a computer to tune it, I guess. A carburetor can be controlled like fuel injection by adding or removing fuel from an injector. O2 sensor may be able to tell you how to jet or tune the carburetor but once you did that why would you need a TPS? Anyway, sorry not to answer but to question, I am thinking with my fingers.
 

Amac70

ME
Joined
Mar 27, 2002
Messages
3,269
he needs it for the tranny, holley sells sells a bracket for putting it on there carbs works well but yeah it will probably interfer with stock housing. Other then that your kinda on your own with it.
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
Thanks! The HGM unit is by far the most adaptable I've seen and would allow both Holley and AFB use. The AFB is better for daily driving but the Holley is better on hunting or camping trips.
 
Top