• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hurst Pro-Matic 2 cable adjustment

kevinv

Jr. Member
Joined
Oct 20, 2010
Messages
57
Loc.
Woodinville
Hello,

Thought I would pass this on for future reference. I don't recall finding this info in any prior posts or in the installation docs.

I initially set the cable adjustment by putting the tranny lever in park, the shifter in park, then adjusting and connecting the cable to the lever. This seemed to make sense but didn't work.

These shifters can be used on GM vehicles which have longer throws from park to reverse. So I was told to do just the opposite, put the tranny lever in 1st, put the shifter in 1st, then adjust and connect the cable. It worked great at that point.

Just wanting to give back,
Kevin
75 302 C4
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I always recommend making adjustments from the neutral position. It splits any error in half.
 

70 Steed

Full Member
Joined
Sep 13, 2011
Messages
268
I recommend unbolting the cable from the shift lever and removing the shifter and throwing in the trash can. :)

That's what I did.
 
Top