• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hydraulic lifter recommendation

OP
OP
N

nrramse

Sr. Member
Joined
Apr 20, 2008
Messages
537
So what was wrong in the first place? You just had a light ticking? More than one lifter maybe?
Or some other weird noise going on?
It was making a clacking noise, very pronounced on startup, and then would come and go during driving.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Sounds more extreme than the ones I've run across on older engines that perhaps were not as well cared for as they could be. Those were typically just a light tapping, from some of the lifters. Usually not all of them, but more often than not, it was more than one.
In those cases, I used "snake oil" additives and it cured every one. Glad your additive cured yours, at least for now. In my experience with the '71 Bronco, the ticking went away for almost 30k miles. When it came back to the point that it got annoying, I went ahead and bought new lifters from the local parts store (I think I paid about 2 bucks a piece maybe?), took the heads off to have a valve job performed, and put the new lifters in at the same time.
Ran like a clock for another 75k 'till I sold it.

Now, I am certainly familiar with clacking lifters during startup. We've owned Corvairs!
I still do have a '65 turbo Corsa in fact, and because I rarely drive it anymore, boy do those lifters like to clack. A LOT and for longer than they used to. Oh well, part of the joy of the engine family and replacement parts.
The originals did it occasionally (maybe two or three times a year), but all the replacements did it regularly. Far too regularly unfortunately...

Almost as bad as the piss-poor state of modern mechanical fuel pumps!
Anyway, glad it's quiet again. Have fun with it!

Paul
 
Top