• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hydroboost clocking

Arniep

Jr. Member
Joined
Jan 5, 2006
Messages
73
Loc.
Polo,(Northwest) Mo
Mocking up my hydroboost setup (Attempting to add Power steering, Hydroboost, F150 steering column), Noticed different clocking on hydroboost pictures on this site. Is there a performance difference in the way it's installed, or is it OK to just set it up for convenience of plumbing? I have a 351w carbureted and a 2 " body lift. Looks like it will mount straight onto the firewall. Arnie
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,110
The hydroboost will work in any position. There are minor differences in the weep hole at the bottom of the junction with the master cylinder. If not corrected it can create a pocket that can hold moisture and cause future corrosion issues. Address that and you are free to clock as you like.

You may be looking at Mustang hydroboost ('97-'04 4.6 V8) that come from the factory with a very favorable clocking and vertical master cylinder bolt pattern.
 
Top