broncokak
Bronco Guru
- Joined
- Jun 13, 2006
- Messages
- 3,969
Broncokak--- your amp should work. Looking at a picture of your amp on the web it looks like you should have a quick connect plug with 8 pins in it. I can only think of seven though. A black for ground, A red for power, probably a blue or yellow for switched power, and the green and gray ones are your speaker output wires. The ones with the black stripes are usually the negative side for the othe wire of like color. Without a book I'm not sure which color would be left or right but it would be easy to switch them around if you could even tell the difference. If you have more wires than 7 I don't know what the other would be for.
The amp you have is relatively small but for door type speakers like the ones shown in this thread it would work great.
I did try hooking this amp up and couldn't get it to work. After playing with it for an hour or so I remembered why I don't use it any more...it's toast! %) But I borrowed one from a buddy and it works great. Thanks for the info.