Ignition switch wires

[Ripcity]

I am working on a 73 Bronco that came with major wiring problems the ignition switch is junk so I am going to install a after market one.

5 wires all together can anyone tell me how they go?

Here is what I think but rather than fry something I thought I would run it by you guys first.


Ignition (Black with Green Stripe)
Battery (Yellow)
Accessory (Green with Red Stripe and Brown wire)
Start (Red with Blue Stripe)

Is this correct?

 

[70_Steve]

Is this correct?

http://seabiscuit68.tripod.com/

 

[Viperwolf1]

I am working on a 73 Bronco that came with major wiring problems the ignition switch is junk so I am going to install a after market one.

5 wires all together can anyone tell me how they go?

Here is what I think but rather than fry something I thought I would run it by you guys first.


Ignition (Black with Green Stripe)
Battery (Yellow)
Accessory (Green with Red Stripe and Brown wire)
Start (Red with Blue Stripe)

Is this correct?

Blk-grn=12V in run and start
Yel=constant 12V to switch (always hot)
Grn-red and pink=12V in run only
Red-blu=12V in start only
Pur=ground in start only

 

[bmc69]

Here ..this should help.

 

[Viperwolf1]

Here ..this should help.

I'll have to add that one to my diagram collection.

 

[bmc69]

I'll have to add that one to my diagram collection.

No attribution necessary. TYVM.

;D

 

[Airmapper]

Here ..this should help.

Lol, Last time that was posted I printed it out and it now resides on the office wall at work. I also sent a copy to maintenance and marked it as a work request.