MO Income taxes are coming, cage kits are ready to ship!

[SpareParts]

That's right, income tax time is just around the corner. What better way to spend it than to make you and your family safer. We have kits already packaged ready to be shipped to your door.

Cages come in kit form
Cages are bent, notched and ready to weld together
Bends are smooth and notches are clean
Fits under a hard top or a soft top
Built from 1 3/4" .120 wall HREW steel tube (DOM extra)

Base Cage Kit is $800
DOM Upgrade is $200
Seat Tubing Option is $200 (See pic), DOM upgrade $50
Grab Handle Package $50 (See pic)
Shipping is extra. Most places in the US run about $180 for the Basic Kit.

Fully welded, media blasted and powdercoated bolt in cages also available for local pickup at extra cost depending on options. Due to all the variations, condition, age, and modifications done to EBs, we recommend fitting the cage to YOUR Bronco for the best result. The cage will need to be attached to the frame for safety and maximum protection.

Interested? Order Yours Today!
Contact Steve Mikulicz AKA "2Busy" or David Lindemeyer AKA "SpareParts" via PM.

 

[naneumranch]

I will be the first to vouch on these cages it was the best investment made. Simple to put back together and weld and nothing but compliment on it .

Hound dog approved
Brian

 

[Jrdesigns]

just curious but i am in the cage market and wondering if you have had any customers roll their rides with your cage. not just a simple roll over on the trail but say high way speeds?

(paranoid dad with two little girls here)

 

[SpareParts]

No, We haven't... As with most of the cages out there, it's to supplement safety. With the triangulation that's in it, I'm expecting it to fair quite well if it's tied to the frame properly. Newer vehicles have engineered crumple zones and in my opinion, will always be safer.

 

[SpareParts]

Hound dog approved
Brian

Thanks again Brian!

 

[2busy]

No, We haven't... As with most of the cages out there, it's to supplement safety. With the triangulation that's in it, I'm expecting it to fair quite well if it's tied to the frame properly. Newer vehicles have engineered crumple zones and in my opinion, will always be safer.

Agreed. Cages in an Early Bronco only enhance safety. Proper seat belts, doors, tops, condition of the Bronco all come into play. A cage reduces the chance of occupants striking the ground in a rollover. Your best chances for safety in a vehicle accident is a vehicle that absorbs the impact (crumple zones, airbags, etc.) Early Broncos were not designed with todays safety features in mind. I'm sure you would agree that there is no safety feature known to man that can absolutely guarantee no injury in every automobile accident. No matter how many tests are done, you will never cover every circumstance. These cages are designed to supplement safety, which I feel they do well when properly installed.

 

[deltarat]

What about 1/2 cabs? Can you leave off the the bends around the dash, so it can go behind the dash?

 

[SpareParts]

Currently we don't offer any 1/2 cab cages. We both offer custom cages if it the Bronco is brought to one of our shops, at a custom price.

 

[langester]

After building my own cage, this is a smoking deal! If I had it to do over again this is the route I would take!

 

[SpareParts]

There is more to it than you would think! Lol. Thanks Langester.

 

[mandinga]

Rad cages...and yeah...thats a novel idea about a refund

 

[TJ.Harry]

After 2+ years of receiving one of these from you guys I am just about ready to install it. Needless to say I got a little sidetracked. Haha. Quick question though. Do you guys have a recommended bikini style top that fits best on this cage?

 

[SpareParts]

I don't.... I have a full top bikini top from somebody that fits OK. I typically run my rampage top as a safari top in the summer.

 

[SpareParts]

Just shipped 2 out to California! Who else wants one?

 

[SpareParts]

Finally found one with a family bikini top on.

 

[helo-mech]

Will a stock hard top fit over it? How about the dash bar, are dash modifications required?

Thanks.

 

[SpareParts]

The stock hard too fits it with not problem. We always recommend checking clearance before final welding, though I have never had any complaints. The dash pad will have to be removed, there's a dash spreader bar that goes in its place. Here's a pic of mine with the hard top.

 

[SpareParts]

W2's are coming in... who needs a cage?

 

[AxlesUp]

Currently we don't offer any 1/2 cab cages. We both offer custom cages if it the Bronco is brought to one of our shops, at a custom price.

can you PM me a ball park quote on a half cab style cage? something like the least it would cost to the most it would cost So i can budget it into my build time frame. I would drive it up to you for the work.

 

[SpareParts]

PM sent!