• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Inner frame cleaning

408Bronco

Sr. Member
Joined
Sep 12, 2011
Messages
381
Loc.
Midwest
Thought i'd pass this info along. To continue along on my project, I needed to clean the inner frame, i'm thinking there was some sort of mouse nest or something along those lines inside the frame. I started by jacking the rear of the frame up and jamming a garden hose down the rail and then blasting water down it, water was running out of everywhere but the end of the rail, it was plugged up. After looking around the garage to use something to stick in the frame to wiggle loose the crap inside, I found an old manual choke cable, perfect, I took out the inner wire out and grabbed the cordless drill, inserted the cable to the end of the chuck, stuck it in the frame holes and pulled the trigger, it worked great, moving from hole to hole with the water running I eventually was able to get the crap out and water was flowwing free out the end of the rail, to speed along drying, I stuck the end of the air hose in and blasted it with compressed air, worked great!
 

BROwN COw

Sr. Member
Joined
Dec 14, 2006
Messages
450
Had this trouble also and used the 25 cent car wash nozzle. A pressure washer is another idea.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Sounds like you just started the newest Roto-Rooter spinoff.
408FrameKleening.com R us!

Paul
 

flint_knapper

BRONCO GOD
Joined
Apr 20, 2002
Messages
2,201
Loc.
Harvest, AL
I remember when I used a pressure washer to clean the inside frame,
there was rocks, nuts, bolts all kinds of stuff floating around in it. ;)
 
Top